Duraplate uhs data sheet.

A two-component, high-solids, high-build amine epoxy coating. Capable of withstanding extreme conditions of abrasion and corrosion, Dura-Plate® 154 Epoxy Splash Zone Coating can be applied from 10-40 mils (250-1000 microns) dry in one coat, as well as over prepared, damp substrates while providing adequate adhesion and a protective film. DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II D335A DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this SDS:hse.pm.emea ...DURA-PLATE® 235 Multi-Purpose Epoxy (Part A) Haze Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Established in 1985, the company specializes in the design and production of dry freight vans, refrigerated vans, platform trailers, intermodal equipment, liquid tank trailers, engineered products, and composite products. Contact information: 866-877-5062. [email protected] wabashnational.com.DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete, steel and iron in severe service environments including splashzone areas on off shore platforms, wharf piles, jetties, chemical plants, pulp and paper mills and water treatment plants.

DURA-PLATE™ UHS: A two component, ultra-high-solids epoxy amine tank lining. D335: EPO-PHEN™ FF: A two component, flake-filled MIO, amine-cured, epoxy phenolic novolac coating. E350: FAST CLAD™ ER: A two component, fast-drying, ultra-high-solids epoxy tank lining with Opti-Check™, Optically Activated Pigments (OAP) technology. E130 ...DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::

DURA-PLATE® UHS Epoxy (Part A), White Base MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).

DURA-PLATE® UHS Epoxy (Part A) OAP Blue Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer … A low-temperature application and curing version of our Dura-Plate® 301K ultra-surface and moisture-tolerant high-solids epoxy coating platform, Dura-Plate® 301W may be applied at ambient and substrate temperatures as low as 35°F (2°C). It is engineered to provide outstanding adhesion and anti-corrosion performance over a wide range of ... DuraPlate is a proven product made by a recognized leader in composite panel technology. Wabash National produces over 50 million square feet of DuraPlate a year. We carefully monitor the DuraPlate manufacturing process to assure its quality and performance. You can trust DuraPlate to deliver, time and time again.to obtain the most recent Product Data Sheet. DURA-PLATE® UHS EPOXY TANK LINING. Title: Dura-Plate UHS_1301-1.indd Author: dxg719 Created Date: 6/9/2023 4:08:23 PM ...

DURA-PLATE® UHS Epoxy (Part A) White Base Not available. Liquid. +1 703-741-5970 SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Relevant identified uses of the substance or mixture and uses advised against Not applicable. B62W210 Product code ...

A two-component, edge-retentive, ultra high-solids epoxy amine coating. Engineered for immersion service in potable water pipes and storage tanks, Sherplate™ PW Epoxy provides superior protection thanks to its rapid-return-to-service, high-build and edge-retentive properties. Interested in learning more or purchasing this product?

Dura-Plate® 8200 High Temperature Epoxy Part A, Gray MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a). DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming. Keeping track of employee hours is an essential task for any business owner or manager. Accurate time sheets help ensure that employees are paid correctly, and they also provide va... 2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information. DURA-PLATE® UHS Epoxy (Part B) Green Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::DURA-PLATE® UHS Epoxy (Part B) Light Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Product safety data sheets (SDS) are essential documents that provide valuable information about the potential hazards and safe handling practices of various substances. The first ...

1 ct. Dura-Plate UHS @ 450 microns dft Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 cycles, 1 kg load 20.8 mg loss Adhesion ASTM D4541-17; ASTM D3359-17 800 psi, minimum (ASTM D4541); 5A (ASTM D3359) Corrosion Weathering ASTM D5894-16 cycles, 2016 hours Rating 10 per ASTM D610 for …EV Battery and Automotive industries are rapidly changing, at Sherwin-Williams we support industry leading technologies that help protect assets, extended lifecycles and reduce rework with our sustainable solutions. Fire Protection. Adopt a safety-first mentality with life-saving protection from fires, cryogenic spills and corrosion.Sherwin-Williams Dura-Plate UHS Primer with Opti-Check OAP (Optically Activated Pigments) technology is a specially designed primer for use under Sherwin-Williams Dura-Plate UHS. It is ideal for use over prepared steel or concrete surfaces in industrial and marine exposures.Airless Spray Low odour Low VOC High flash point, >93°C …Dura-Plate® 8200 offers high temperature and chemical resistant protection against aggressive chemicals and crude oil mixes. This rapid cure lining allows assets to return to service within 24 hours, saving the owner the added expense of additional downtime. Plus, it can be applied with a single leg sprayer, allowing for easier application.An ultra-surface and moisture-tolerant high-solids epoxy coating, Dura-Plate® 301K is engineered to provide outstanding adhesion and anti-corrosion performance over a wide range of surface preparation … Refer to the MSDS sheet before use. Published technical data and instructions are subject to change without notice. ... Dura-Plate UHS Clear Laminate 40.0-45.0 (1000 ... 1 ct. Dura-Plate 2300 as needed to fi ll surface imperfections 1 ct. (Optional) Primer as defi ned above 1 ct. Dura-Plate 6000 60.0-125.0+** (1,500-3,125) ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company.

DURA-PLATE UHS is an ultra high solids epoxy amine engineered spe-cifi cally for use as a laminating system in immersion service in ballast tanks, oil tanks, and refi ned fuel storage tanks. The high build properties of Dura-Plate UHS Clear provide superior protection compared to con-ventional epoxies.

DURA-PLATE UHS Epoxy Tank Lining - Low Temperature Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II D335ALT DURA-PLATE UHS Epoxy Tank Lining - Low Temperature Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of …DURA-PLATE® UHS Epoxy (Part A) White Base Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::PRODUCTDESCRIPTION. DURA-PLATE UHS For use over prepared steel or concrete surfaces in industrial and marine The rapid return to service and high build, edge retentive properties of this superior tank lining provide superior protection. Can be applied by conventional airless pumps in a single coat, Dura-Plate UHS is the user friendly solution ... A two-component, advanced technology novolac epoxy. Dura-Plate® 8200. A two-component, advanced technology novolac epoxy. Engineered to provide protection from crude oil mixes and aggressive chemicals stored at high temperatures in high-gradient environments, Dura-Plate® 8200 can be applied by plural or single-leg application, and cures to service in 24 hours in most cases. PRODUCT DATA SHEET. DURA-PLATE® UHS. EPOXY TANK LINING. Revised: May 1, 2018. PRODUCT DESCRIPTION. DURA-PLATE UHS an ultra high solids epoxy amine engineered specifically for immersion service in ballast tanks, oil tanks, and refined fuel storage tanks.DURA-PLATE UHS is an ultra high solids epoxy amine engineered spe-cifi cally for use as a laminating system in immersion service in ballast tanks, oil tanks, and refi ned fuel storage tanks. The high build properties of Dura-Plate UHS Clear provide superior protection compared to con-ventional epoxies.DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete, steel and iron in severe service environments including splashzone areas on off shore platforms, wharf piles, jetties, chemical plants, pulp and paper mills and water treatment plants.DuraPlate is a proven product made by a recognized leader in composite panel technology. Wabash National produces over 50 million square feet of DuraPlate a year. We carefully monitor the DuraPlate manufacturing process to assure its quality and performance. You can trust DuraPlate to deliver, time and time again.Dura-Plate UHS is suitable for application through normal airless spray equipment. Available air pressure and capacity of spray equipment should be at least 5.0kg cm-2 and 7.0m3 per minute (70 p.s.i. and 250 c.f.m.). Airless spray equipment should be in good working order.

PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray.

2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information.

2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information.Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range of contents from crude oil to potable water.Please ...Dura-Plate UHS is suitable for application through normal airless spray equipment. Available air pressure and capacity of spray equipment should be at least 5.0kg cm-2 and 7.0m3 per minute (70 p.s.i. and 250 c.f.m.). Airless spray equipment should be in good working order.DURA-PLATE® UHS Epoxy (Part A) White Base Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Dura-Plate UHS superior performance results from the combination of an advanced amine curing system with the perfectly engineered film rheology. The curing concept provides high chemical resistance and excellent barrier properties. The rheology allows enhanced edge retention features which maximise the coverage of edges and weld areas.Dura-Plate® UHS Primer. Dura-Plate® UHS PRIMER is an ultra high solids epoxy amine formulated specifically as a primer for use under Dura-Plate® UHS topcoat. For use in immersion service in ballast tanks, oil tanks, and refined fuel storage tanks. Dura-Plate® UHS Primer provides excellent surface wetting and adhesion properties, especially ...DURA-PLATE® UHS Epoxy (Part A) White Base Not available. Liquid. +1 703-741-5970 SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Relevant identified uses of the substance or mixture and uses advised against Not applicable. B62W210 Product code ...In 1996, Wabash revolutionized semi-trailers by setting a new standard of performance in trailer sidewall technology. Our DuraPlate ® Composite Technology continues to deliver on the promise of exceptional durability and damage-resist performance. Today, our original DuraPlate and next-generation DuraPlate Cell Core panels are used in dry ...DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II D335A DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this SDS:hse.pm.emea ...EV Battery and Automotive industries are rapidly changing, at Sherwin-Williams we support industry leading technologies that help protect assets, extended lifecycles and reduce rework with our sustainable solutions. Fire Protection. Adopt a safety-first mentality with life-saving protection from fires, cryogenic spills and corrosion. A two-component, ultra high-solids epoxy amine. Engineered specifically for immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Epoxy provides superior protection through its high-build, edge-retentive properties as compared to conventional epoxies. Interested in learning more or purchasing this ...

Sherwin-Williams Protective & Marine Coatings launched Dura-Plate 6000, a new 100 percent solids, high-build, high-strength, reinforced epoxy lining for concrete and steel in severe wastewater service environments. The durable lining material offers asset owners and applicators a variety of time and cost efficiencies due to its fast return-to …Jun 7, 2023 · This application guide must be read in-conjunction with the relevant specification, technical data sheet (TDS) and safety data sheet (SDS). Contractors …DURA-PLATE® UHS Epoxy (Part B) Light Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600. Sherwin-Williams Company. 101 Prospect Avenue. Cleveland, OH 44115. United States. 773-821-3420. Facility : Victorville, CA.Instagram:https://instagram. kinetic windstream report outagegolden corral georgetown txcraigslist durham free stuffpimple in my belly button NOTE: Dura-Plate UHS may be applied at alternate thicknesses, up to 50 mils (1,250 microns), depending on application conditions. Consult your Sherwin-Williams representative for ... to obtain the most recent Product Data Sheet. DURA-PLATE® UHS EPOXY TANK LINING. Title: Dura-Plate UHS_1301-1.indd Author: dxg719 Created Date:1 ct. Dura-Plate UHS @ 450 microns dft Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 cycles, 1 kg load 20.8 mg loss Adhesion ASTM D4541-17; ASTM D3359-17 800 psi, minimum (ASTM D4541); 5A (ASTM D3359) Corrosion Weathering ASTM D5894-16 cycles, 2016 hours Rating 10 per ASTM D610 for … bianca de la garza net worthescape room mchenry il Surface Preparation: BS EN ISO 8501-1 2007 Sa21⁄2. System Tested: 1 ct. Dura-Plate UHS @ 450 microns dft. Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 20.8 mg loss cycles, 1 kg load. PDS Dura-plate UHS Primer - Issue 3.indd. PRODUCT DESCRIPTION. RECOMMENDED USES. For use over prepared steel or concrete surfaces in industrial and marine exposures such as: Meets MIL-PRF-23236, Type VII, Class 5, 7, 9 and 11, Grade C. Ballast tank interiors. Potable water tanks and pipes (Certifi ed to NSF/ANSI 61) Oil storage tank … litter robot firmware update When it comes to cleaning and disinfecting, Clorox is one of the most trusted brands. But when it comes to storing and handling Clorox, it’s important to make sure you’re doing so ...Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. • Airless Spray • Low odor • High fl ash point, >200°F (93°C) • Low Temperature Hardener for applications from 40°F to 77°F (4.5°C to 25°C) • NSF approved to Standard 61/600 for potable water (tanks of ...DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming.